Blackbody Curves & UBV Filters – Student Guide
Thoroughly review the “Spectra” and “Filters” background pages. The color index page may also
be helpful to review.
Filters Simulator Overview
The filters simulator allows one to observe light from various sources passing through multiple
filters and the resulting light that passes through to some detector. An “optical bench” shows the
source, slots for filters, and the detected light. The wavelengths of light involved range from 380
nm to 825 nm which more than encompass the range of wavelengths detected by the human eye.
The upper half of the simulator graphically displays the source-filter-detector process. A graph of
intensity versus wavelength for the source is shown in the leftmost graph. The middle graph
displays the combined filter transmittance – the percentage of light the filters allow to pass for
each wavelength. The rightmost graph displays a graph of intensity versus wavelength for the
light that actually gets through the filter and could travel on to some detector such as your eye or
a CCD. Color swatches at the far left and right demonstrate the effective color of the source and
detector profile respectively.
The lower portion of the simulator contains tools for controlling both the light source and the
In the source panel perform the following actions to gain familiarity.
o Create an blackbody source distribution – the spectrum produced by a light bulb
which is a continuous spectrum. Practice using the temperature and peak height
controls to control the source spectrum.
o Create a bell-shaped spectrum. This distribution is symmetric about a peak
wavelength. Practice using the peak wavelength, spread, and peak height
controls to vary the source spectrum.
o Practice creating piecewise linear sources. In this mode the user has complete
control over the shape of the spectrum as control points can be dragged to any
value of intensity.
Additional control points are created whenever a piecewise segment is
clicked at that location.
Control points may be deleted by holding down the Delete key and
Control points can be dragged to any location as long as they don’t pass
the wavelength value of another control point.
NAAP – Blackbody Curves & UBV Filters 1/7•
In the filters panel perform the following actions to gain familiarity.
o Review the shapes of the preset filters (the B,V, and R filters) in the filters list.
Clicking on them selects them and displays them in the graph in the filters panel.
o Click the add button below the filters list.
Rename the filter from the default (“filter 4”).
Shape the piecewise linear function to something other than a flat line.
o Click the add button below the filters list.
Select bell-shaped from the distribution type pull down menu.
Alter the features of the default and rename the filter.
o If desired, click the remove button below the filters list. This removes the
actively selected filter (can’t remove the preset B,V, and R filters). Filters are not
saved anywhere. Refreshing the flash file deletes the filters.
Filters Simulator Questions
• Use the piecewise linear mode of the source panel to create a “flat white light” source at
maximum intensity. This source will have all wavelengths with equal intensity.
• Drag the V filter to a slot in the beam path (i.e. place them in the filter rack).
• Try the B and the R filter one at a time as well. Dragging a filter anywhere away from the
filter rack will remove it from the beam path.
Question 1: Sketch the graphs for the flat white light and V filter in the boxes below. What is the
effective color of the detected distribution?
combined filter transmittance
Question 2: With the flat white light source, what is the relationship between the filter
transmittance and the detected distribution?
NAAP – Blackbody Curves & UBV Filters 2/7• Add a new piecewise linear filter.
• Adjust the filter so that only large amounts of green light pass. This will require that
addition of points.
Question 3: Use this green filter with the flat white light source and sketch the graphs below.
combined filter transmittance
Question 4: Use the blackbody option in the source panel to create a blackbody spectrum that
mimics white light. What is the temperature of this blackbody you created?
• Add a new piecewise linear filter to the filter list.
• Modify the new filter to create a 40% “neutral density filter”. That is, create a filter which
allows approximately 40% of the light to pass through at all wavelengths.
• Set up the simulator so that light from the “blackbody white light” source passes through
Question 5: Sketch the graphs created above in the boxes below. (This situation crudely
approximates what sunglasses do on a bright summer day.)
combined filter transmittance
Question 6: Remove all filters in the filters rack. Place a B filter in the beam path with the flat
white light source. Then add a second B filter and then a third. Describe and explain what
happens when you add more than one of a specific filter.
NAAP – Blackbody Curves & UBV Filters 3/7Question 7: Place a B filter in the beam path with the 40% neutral density filter. Then add a V
filter into the beam path. Describe and explain what happens when you add more than one filter
to the filter rack.
Question 8: Create a piecewise linear filter that when used with the flat
white light source would allow red and blue wavelengths to pass and
thus effectively allowing purple light to pass. Draw the filter in the box
to the right.
• Remove all filters from the filters rack.
• Create a very narrow bell-shaped source distribution that is peaked at green wavelengths
(somewhere close to 550 nm). Notice the color.
• Expand the spread of the source distribution to maximum. Notice how the color changes.
• Change the distribution source to an blackbody source peaked at green wavelengths (a
temperature close to 5270 K). Again notice the color.
Question 9: Using observations from the above actions, explain why we don’t observe “green
stars” in nature, though there are indeed stars which emit more green light than other
NAAP – Blackbody Curves & UBV Filters 4/7Blackbody – Curves Mode Familiarization
The Blackbody Curve Simulator has two main modes – the curves mode and the filters mode.
The curves mode allows the exploration of blackbody curves including their peak wavelength
and the area under the curve which is related to their total energy production.
Learn how to add and remove curves and change their temperatures.
o Click the add curve button one or more times.
o Change the temperature slider. Notice which curve changes.
o Select a second curve and change temperature.
o Remove all but 1 or 2 extra curves.
Learn the vertical scale options. Have 2 or 3 curves in the explorer.
o Change temperature with the auto scale all curves mode.
o Change temperature with the auto scale to selected curve mode.
o Change temperature with the lock scales mode.
Learn the horizontal scale options. Select the horizontal scale tab.
o Note how changing the rightmost limit changes the view.
Use, if desired, the indicate peak wavelength and highlight area under curve options.
Blackbody Curves – Questions
Question 10: Create a blackbody curve of temperature 6000
K and draw the shape in the box to the right. Does it have a
peak? Is it symmetric about this peak?
Question 11: Create a second curve using the add curve button and use the temperature slider to
vary its temperature. Can you find a blackbody curve of another temperature that intersects the
6000 K curve? Do you believe this would be true for two curves of any temperature?
NAAP – Blackbody Curves & UBV Filters 5/7Question 12: Make sure that there is only one curve and check indicate peak wavelength. Vary
the temperature of the curve and note how the peak wavelength changes. Formulate a general
statement relating the peak wavelength to temperature. Then compare this statement with Wien’s
Law discussed in the background pages.
Question 13: Select the highlight area under curve option and lock the vertical scale. Vary the
temperature of the curve and note how the area under the curve changes. Formulate a general
statement relating the area under curve to temperature.
Question 14: (Calculator Required) Complete the following table below. The “Area Ratio” is the
area for the curve divided by the area for the curve in the row above. This will tell you many
times greater the new ratio is compared to the previous one.
Area Under Curve (W/m 2 )
Can you specify a more precise statement relating the area under curve to temperature. Is this
consistent with what was referred to as the Stefan-Boltzmann Law in the background pages?
NAAP – Blackbody Curves & UBV Filters 6/7Blackbody Explorer – Filters Mode
The second mode is the filters mode and explores the use of UBVR filters with blackbody
Unselect highlight area under curve and indicate peak wavelength. Select the filters
The light from a blackbody curve that passes through the UBVR filters are shown as colored
areas under the curve. It is this area which is later translated into a number for color magnitude.
Remember that a magnitude is a logarithmic version of the flux (i.e. the amount of light) that
passes through a filter and that lower numbers reflect larger fluxes. Note that this area depends
on both the source and the filter. What is listed as a V value is the apparent magnitude of a star
(assumed to blackbody which isn’t exactly true) through the V filter.
Question 15: Vary the temperature and in the table to the right
note the temperature in at which each filter peaks. Where are Curve
the filters most sensitive, i.e. which temperature will give the B
strongest response in a detector? V
Question 16: Use the color index feature to create a B-V index. This will compare the apparent
magnitude of a star through the B filter to that through the V filter. Plot temperature on the
vertical axis and B-V on the horizontal.
Question 17: Use your graph to estimate the B-V value of a 12,000 K blackbody.
NAAP – Blackbody Curves & UBV Filters 7/7
We value our customers and so we ensure that what we do is 100% original..
With us you are guaranteed of quality work done by our qualified experts.Your information and everything that you do with us is kept completely confidential.
You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.Read more
The Product ordered is guaranteed to be original. Orders are checked by the most advanced anti-plagiarism software in the market to assure that the Product is 100% original. The Company has a zero tolerance policy for plagiarism.Read more
The Free Revision policy is a courtesy service that the Company provides to help ensure Customer’s total satisfaction with the completed Order. To receive free revision the Company requires that the Customer provide the request within fourteen (14) days from the first completion date and within a period of thirty (30) days for dissertations.Read more
The Company is committed to protect the privacy of the Customer and it will never resell or share any of Customer’s personal information, including credit card data, with any third party. All the online transactions are processed through the secure and reliable online payment systems.Read more
By placing an order with us, you agree to the service we provide. We will endear to do all that it takes to deliver a comprehensive paper as per your requirements. We also count on your cooperation to ensure that we deliver on this mandate.Read more